Application Areas

Geotextile for road construction should not be selected by GSM weight alone. The correct fabric depends on what problem the road project needs to solve: separating soil layers, improving drainage, stabilizing weak subgrade, or surviving heavy construction loads. Many road failures start below the surface. When fine soil mixes with aggregate, water cannot move properly, […]

Choosing a composite geotextile is not only about checking weight, thickness, or appearance. For reinforcement projects, composite geotextile tensile strength is one of the key values that determines whether the material can resist pulling forces, maintain soil stability, and perform under construction loads. Many project failures are not caused by the geotextile itself, but by […]

If a geomembrane fails shortly after installation, the liner is not always the problem. In many projects, damage starts underneath the membrane, where sharp stones, crushed aggregate, or uneven subgrade create concentrated pressure points. Once construction equipment or overlying materials apply additional load, small punctures can quickly develop into leaks. Why do geomembranes fail on […]

Dumping 75mm blasted quarry stone directly onto a thin filtration fabric instantly ruins your subgrade separation layer before compaction equipment even rolls out. If you under-spec your fabric weight, the aggregate punctures the matrix; if you over-spec, you waste thousands of dollars in unnecessary material overhead across large project acreages. What Causes a 150 GSM […]